Wednesday, May 13, 2009


How to clear E27 Waste ink absorber full
With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset button.
When the Power is lit, press the Stop/Reset button two times
while pressing and holding the Power button.

When releasing the Power button and the Stop / Reset button (regardless of order),
the printer will move into a service mode. (Waiting for menu selection)
When the on/off lights in green, press the Stop/Reset button the
specified number of time(s) according to the function listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately in orange
and green, starting with orange.)note: press 4 times for waste ink counter reset.
5.Turn off the printer.( it must be turn off) then turn it on again.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

NOTE! May work with other MFC printer like MP180


Anonymous said...

This was a very usefull information for me!!! Thx a lot!

crysklx said...

U are welcome. Glad to be of help

Anonymous said...

I'll recomande your site to my friends..:)